 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Order this document by LM833/D LM833 Dual Low Noise, Audio Amplifier The LM833 is a standard low-cost monolithic dual general-purpose operational amplifier employing Bipolar technology with innovative high-performance concepts for audio systems applications. With high frequency PNP transistors, the LM833 offers low voltage noise (4.5 nV/ Hz ), 15 MHz gain bandwidth product, 7.0 V/s slew rate, 0.3 mV input offset voltage with 2.0 V/C temperature coefficient of input offset voltage. The LM833 output stage exhibits no deadband crossover distortion, large output voltage swing, excellent phase and gain margins, low open loop high frequency output impedance and symmetrical source/sink AC frequency response. The LM833 is specified over the automotive temperature range and is available in the plastic DIP and SO-8 packages (P and D suffixes). For an improved performance dual/quad version, see the MC33079 family. DUAL OPERATIONAL AMPLIFIER SEMICONDUCTOR TECHNICAL DATA * * * * * * * * Low Voltage Noise: 4.5 nV/ Hz High Gain Bandwidth Product: 15 MHz High Slew Rate: 7.0 V/s Low Input Offset Voltage: 0.3 mV Low T.C. of Input Offset Voltage: 2.0 V/C Low Distortion: 0.002% Excellent Frequency Stability Dual Supply Operation 8 1 N SUFFIX PLASTIC PACKAGE CASE 626 8 1 D SUFFIX PLASTIC PACKAGE CASE 751 (SO-8) PIN CONNECTIONS VCC Output 2 MAXIMUM RATINGS Rating Supply Voltage (VCC to VEE) Input Differential Voltage Range (Note 1) Input Voltage Range (Note 1) Output Short Circuit Duration (Note 2) Operating Ambient Temperature Range Operating Junction Temperature Storage Temperature Maximum Power Dissipation (Notes 2 and 3) Symbol VS VIDR VIR tSC TA TJ Tstg PD Value +36 30 15 Indefinite -40 to +85 +150 -60 to +150 500 C C C mW Unit V V V Output 1 1 8 2 1 7 Inputs 1 3 2 6 Inputs 2 5 VEE 4 (Top View) ORDERING INFORMATION Device LM833N LM833D TA = - 40 to +85C Operating Temperature Range Package Plastic DIP SO-8 NOTES: 1. Either or both input voltages must not exceed the magnitude of VCC or VEE. 2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see power dissipation performance characteristic). 3. Maximum value at TA 85C. (c) Motorola, Inc. 1996 Rev 0 MOTOROLA ANALOG IC DEVICE DATA 1 LM833 ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = -15 V, TA = 25C, unless otherwise noted.) Characteristic Input Offset Voltage (RS = 10 , VO = 0 V) Average Temperature Coefficient of Input Offset Voltage RS = 10 , VO = 0 V, TA = Tlow to Thigh Input Offset Current (VCM = 0 V, VO = 0 V) Input Bias Current (VCM = 0 V, VO = 0 V) Common Mode Input Voltage Range Large Signal Voltage Gain (RL = 2.0 k, VO = 10 V Output Voltage Swing: RL = 2.0 k, VID = 1.0 V RL = 2.0 k, VID = 1.0 V RL = 10 k, VID = 1.0 V RL = 10 k, VID = 1.0 V Common Mode Rejection (Vin = 12 V) Power Supply Rejection (VS = 15 V to 5.0 V, -15 V to -5.0 V) Power Supply Current (VO = 0 V, Both Amplifiers) Symbol VIO VIO/T IIO IIB VICR AVOL VO+ VO- VO+ VO- CMR PSR ID Min - - - - - -12 90 10 - 12 - 80 80 - Typ 0.3 2.0 10 300 +14 -14 110 13.7 -14.1 13.9 -14.7 100 115 4.0 Max 5.0 - 200 1000 +12 - - - -10 - -12 - - 8.0 dB dB mA Unit mV V/C nA nA V dB V AC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = -15 V, TA = 25C, unless otherwise noted.) Characteristic Slew Rate (Vin = -10 V to +10 V, RL = 2.0 k, AV = +1.0) Gain Bandwidth Product (f = 100 kHz) Unity Gain Frequency (Open Loop) Unity Gain Phase Margin (Open Loop) Equivalent Input Noise Voltage (RS = 100 , f = 1.0 kHz) Equivalent Input Noise Current (f = 1.0 kHz) Power Bandwidth (VO = 27 Vpp, RL = 2.0 k, THD 1.0%) Distortion (RL = 2.0 k, f = 20 Hz to 20 kHz, VO = 3.0 Vrms, AV = +1.0) Channel Separation (f = 20 Hz to 20 kHz) Symbol SR GBW fU m en in BWP THD CS Min 5.0 10 - - - - - - - Typ 7.0 15 9.0 60 4.5 0.5 120 0.002 -120 Max - - - - - - - - - Unit V/s MHz MHz Deg nV pA Hz Hz kHz % dB Figure 1. Maximum Power Dissipation versus Temperature PD , MAXIMUM POWER DISSIPATION (mW) 800 IIB , INPUT BIAS CURRENT (nA) 1000 800 600 400 200 Figure 2. Input Bias Current versus Temperature 600 VCC = +15 V VEE = -15 V VCM = 0 V 400 200 0 -50 0 50 100 TA, AMBIENT TEMPERATURE (C) 150 0 -55 -25 0 25 50 75 TA, AMBIENT TEMPERATURE (C) 100 125 2 MOTOROLA ANALOG IC DEVICE DATA LM833 Figure 3. Input Bias Current versus Supply Voltage 800 I IB , INPUT BIAS CURRENT (nA) IS , SUPPLY CURRENT (mA) TA = 25C 600 10 8.0 6.0 IS Figure 4. Supply Current versus Supply Voltage VCC RL = TA = 25C VO + VEE 400 4.0 2.0 0 200 0 5.0 10 15 VCC, |VEE|, SUPPLY VOLTAGE (V) 20 0 5.0 10 15 VCC, |VEE|, SUPPLY VOLTAGE (V) 20 Figure 5. DC Voltage Gain versus Temperature 110 AVOL, DC VOLTAGE GAIN (dB) VCC = +15 V VEE = -15 V RL = 2.0 k 110 AVOL, DC VOLTAGE GAIN (dB) Figure 6. DC Voltage Gain versus Supply Voltage RL = 2.0 k TA = 25C 100 105 100 90 95 90 -55 -25 0 25 50 75 TA, AMBIENT TEMPERATURE (C) 100 125 80 5.0 10 15 VCC, |VEE|, SUPPLY VOLTAGE (V) 20 Figure 7. Open Loop Voltage Gain and Phase versus Frequency AVOL, OPEN LOOP VOLTAGE GAIN (dB) GBW, GAIN BANDWIDTH PRODUCT (MHz) 120 100 45 80 60 40 20 0 1.0 10 100 1.0 k 10 k 100 k f, FREQUENCY (Hz) 1.0 M VCC = +15 V VEE = -15 V RL = 2.0 k TA = 25C Phase 90 0 , EXCESS PHASE (DEGREES) 20 Figure 8. Gain Bandwidth Product versus Temperature 15 10 VCC = +15 V VEE = -15 V f = 100 kHz Gain 135 5.0 180 10 M 0 -55 -25 0 25 50 75 TA, AMBIENT TEMPERATURE (C) 100 125 MOTOROLA ANALOG IC DEVICE DATA 3 LM833 Figure 9. Gain Bandwidth Product versus Supply Voltage GBW, GAIN BANDWIDTH PRODUCT (MHz) 30 f = 100 kHz TA = 25C 20 10 Figure 10. Slew Rate versus Temperature SR, SLEW RATE (V/ s) 8.0 Falling Rising 6.0 VCC = +15 V VEE = -15 V RL = 2.0 k AV = +1.0 -25 - + 10 4.0 Vin VO RL 0 5.0 10 15 VCC, |VEE|, SUPPLY VOLTAGE (V) 20 2.0 -55 0 25 50 75 TA, AMBIENT TEMPERATURE (C) 100 125 Figure 11. Slew Rate versus Supply Voltage 10 8.0 SR, SLEW RATE (V/ s) 6.0 4.0 2.0 0 5.0 Vin Figure 12. Output Voltage versus Frequency 35 Falling Rising VO, OUTPUT VOLTAGE (Vpp ) RL = 2.0k AV = +1.0 TA = 25C 30 25 20 15 10 5.0 VCC = +15 V VEE = -15 V RL = 2.0 k THD 1.0% TA = 25C + - VO RL v 10 15 VCC, |VEE|, SUPPLY VOLTAGE (V) 20 0 10 100 1.0 k 10 k 1.0 M f, FREQUENCY (Hz) 10 M 100 k Figure 13. Maximum Output Voltage versus Supply Voltage RL = 10 k TA = 25C VO + V sat , OUTPUT SATURATION VOLTAGE |V| 20 VO, OUTPUT VOLTAGE (Vpp ) 15 10 5.0 0 15 Figure 14. Output Saturation Voltage versus Temperature +Vsat 14 -Vsat -5.0 -10 -15 -20 5.0 10 15 VCC, |VEE|, SUPPLY VOLTAGE (V) 20 VO - VCC = +15 V VEE = -15 V RL = 10 k 13 -55 -25 0 25 50 75 TA, AMBIENT TEMPERATURE (C) 100 125 4 MOTOROLA ANALOG IC DEVICE DATA LM833 Figure 15. Power Supply Rejection versus Frequency PSR, POWER SUPPLY REJECTION (dB) VCC = +15 V VEE = -15 V TA = 25C VCC ADM Figure 16. Common Mode Rejection versus Frequency CMR, COMMON MODE REJECTION (dB) 160 140 120 CMR = 20 Log 100 80 60 40 20 100 VCC = +15 V VEE = -15 V VCM = 0 V VCM = 1.5 V TA = 25C 1.0 k 10 k 100 k f, FREQUENCY (Hz) 1.0 M 10 M VCM - + ADM 140 120 100 80 60 40 20 0 100 +PSR = 20 Log -PSR = 20 Log 1.0 k -PSR - + VO VEE VO VCM x ADM V0 +PSR ( ( VO/ADM VCC VO/ADM VEE ) ) 1.0 M 10 M 10 k 100 k f, FREQUENCY (Hz) Figure 17. Total Harmonic Distortion versus Frequency THD, TOTAL HARMONIC DISTORTION (%) 1.0 - + 0.1 VO RL Figure 18. Input Referred Noise Voltage versus Frequency 10 e n, INPUT NOISE VOLTAGE (nV/ Hz ) VCC = +15 V VEE = -15 V RL = 2.0 k TA = 25C 5.0 0.01 VO = 1.0 Vrms 2.0 VCC = +15 V VEE = -15 V RS = 100 TA = 25C 0.001 10 VO = 3.0 Vrms 100 1.0 k f, FREQUENCY (Hz) 10 k 100 k 1.0 10 100 1.0 k f, FREQUENCY (Hz) 10 k 100 k Figure 19. Input Referred Noise Current versus Frequency i n , INPUT NOISE CURRENT (pA/ Hz ) 2.0 e n, INPUT NOISE VOLTAGE (nV/ Hz ) VCC = +15 V VEE = -15 V TA = 25C 100 Figure 20. Input Referred Noise Voltage versus Source Resistance VCC = +15 V VEE = -15 V Vn(total) = (inRS)2 +en2 + 4KTRS TA = 25C 1.0 0.7 0.5 0.4 0.3 0.2 10 10 100 1.0 k f, FREQUENCY (Hz) 10 k 100 k 1.0 1.0 10 100 1.0 k 10 k 100 k 1.0 M RS, SOURCE RESISTANCE () MOTOROLA ANALOG IC DEVICE DATA 5 LM833 Figure 21. Inverting Amplifier VO , OUTPUT VOLTAGE (5.0 V/DIV) VO , OUTPUT VOLTAGE (5.0 V/DIV) VCC = +15 V VEE = -15 V RL = 2.0 k CL = 0 pF AV = -1.0 TA = 25C Figure 22. Noninverting Amplifier Slew Rate VCC = +15 V VEE = -15 V RL = 2.0 k CL = 0 pF AV = +1.0 TA = 25C t, TIME (2.0 s/DIV) t, TIME (2.0 s/DIV) Figure 23. Noninverting Amplifier Overshoot VO , OUTPUT VOLTAGE (10 mV/DIV) VCC = +15 V VEE = -15 V RL = 2.0 k CL = 0 pF AV = +1.0 TA = 25C t, TIME (200 ns/DIV) 6 MOTOROLA ANALOG IC DEVICE DATA LM833 OUTLINE DIMENSIONS N SUFFIX PLASTIC PACKAGE CASE 626-05 ISSUE K 8 5 NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. DIM A B C D F G H J K L M N MILLIMETERS MIN MAX 9.40 10.16 6.10 6.60 3.94 4.45 0.38 0.51 1.02 1.78 2.54 BSC 0.76 1.27 0.20 0.30 2.92 3.43 7.62 BSC --- 10_ 0.76 1.01 INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC --- 10_ 0.030 0.040 -B- 1 4 F NOTE 2 -A- L C -T- SEATING PLANE J N D K M M H G 0.13 (0.005) TA M B M D SUFFIX PLASTIC PACKAGE CASE 751-05 (SO-8) ISSUE R A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.18 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 0.25 B M CB S A S q MOTOROLA ANALOG IC DEVICE DATA 7 LM833 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 8 MOTOROLA ANALOG IC DEVICE DATA LM833/D *LM833/D* |
Price & Availability of LM833
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |